Configuring a Canon CaptureOnTouch Scanner

Overview

With the Canon P-215II or P-208II scanners, no configuration is needed for SmartVault, and the profiles used to scan to SmartVault already exist in Canon software.

See the articles below for using the Canon P-215II or Canon P-208II scanners with SmartVault:

Before Getting Started

You must have the following before getting started:

  • A supported Canon scanner.
  • The SmartVault Desktop software.
  • Any of the following Windows operating systems, 10, 8.1, 7, or Vista.
  • The scanner must be plugged in, with drivers installed, with the ability to scan documents to a folder on your computer.
  • The scanner must be turned on and be open with a continuous blue light behind the power button and the auto-start switch on the back configured to Off.

Configuring the Canon Profiles Manually from the SmartVault Toolbar Profile

  1. From the Start menu, click All Programs and select the folder that matches your model of Canon scanner (e.g., Canon P-215).
  2. Run the CaptureOnTouch program from that folder.
  3. Create a new job in the Job List by clicking the + button in the bottom left-hand corner of the screen.
  4. Enter the name of the job, SmartVault Toolbar, in the available field in the Job List.
  5. For the Output Method Selection field, select Send to Application.
  6. Select the Start Button for the Button Assignment field.
  7. The next three settings are optional. Leave all as default.
  8. Click Output Setting.
  9. Click Application.
  10. In the Select Application window, browse to Computer > C:\ > Program Files (x86) or Program Files > SmartVault.
  11. Select the SVault.Client.ScanReceived.exe file and click Open.

Configuring the Canon Profiles from the SmartVault Inbox Profile

  1. From the Start menu, click All Programs and select the folder that matches your model of Canon scanner (e.g., Canon P-215).
  2. Run the CaptureOnTouch program from that folder.
  3. Create a new job in the Job List by clicking the + button in the bottom left-hand corner of the screen.
  4. Enter the name of the job, SmartVault Inbox, in the available field in the Job List.
  5. For the Output Method Selection field, select Send to Application.
  6. Select the Start Button for the Button Assignment field.
  7. The next three settings are optional. Leave all as default.
  8. Click Output Setting.
  9. Click Application.
  10. In the Select Application window, browse to Computer > C:\ > Program Files (x86) or Program Files > SmartVault.
  11. Select the SVault.Client.ScanReceivedInbox.exe file and click Open. For more advanced feature settings, review your Canon documentation for details.

Considerations

Supported Canon scanner models include Canon ImageFormula P-215, DR-C125, DR-M160. 

To disable Duplex scanning, you must turn off Scans in Full Auto mode in the profile. Then click the Scanner Setting button and select Scanning Side: Simplex.

...